Oral Presentations
We invite you to submit a one-page abstracts that will be published in the book of abstracts (with ISBN number) for a 15 min online presentation. You must record your presentation via our online platform in advance of our conference (until May, 17/24). Every participant can stream your talk from then on until 3 month after the conference. On the 2nd day of the conference, you will get a virtual room to discuss your results with other participants. There will be 3 awards for the best oral presentations.
List of Oral Presentations
Below you can see the list of contributions, the abstracts will be published in the next few days. Authors who have confirmed their participation and from whom we have received all the necessary information are represented by colored pictures. (If your your image is missing here please sent it by email to office@vesps2021.net)
Additive Manufacturing / 3D Printing
OP-1
Yinyin Bao
ETH Zürich, Zürich, Switzerland
3D PRINTING OF BIODEGRADABLE PHOTOPOLYMERS FOR PERSONALIZED MEDICAL DEVICES
Discussion session A1
Wednesday, June 16 14:00 CEST
Abstract
OP-2
Ines Cazin
Polymer Competence Center Leoben GmbH PCCL, Leoben, Austria
PRINTING OF METAMATERIALS BY DIGITAL LIGHT PROCESSING 3D PRINTING: MYTH OR REALITY?
Discussion session A1
Wednesday, June 16 14:00 CEST
Abstract
OP-3
Andrea Cosola
Politecnico di Torino, Turin, Italy
H-BOND STABILIZED SHAPE MEMORY POLYMERS: FROM 3D TO 4D PRINTING
Discussion session A1
Wednesday, June 16 14:00 CEST
Abstract
OP-10
Whytneigh R. Duffie
South Dakota School of Mines and Technology, Rapid City, USA
SYNTHESIS, CHARACTERIZATION, AND APPLICATION OF NOVEL SURFACE-ERODING PHOTOPOLYMER FORMULATIONS
Discussion session A4
Wednesday, June 16 15:30 CEST
Abstract
OP-4
Katharina Ehrmann
TU Wien, Vienna, Austria
MALEIMIDE-STYRENE-BUTADIENE TERPOLYMERS AS TOUGH PHOTOPOLYMERS FOR ADDITIVE MANUFACTURING
Discussion session A2
Wednesday, June 16 14:30 CEST
Abstract
OP-11
Xavier Fernández-Francos
Universitat Politècnica de Catalunya, Barcelona, Spain
DUAL-CURABLE VITRIMERS FOR 3D-PRINTING
Discussion session A4
Wednesday, June 16 15:30 CEST
Abstract
OP-5
Gustavo Gonzalez
Politecnico di Torino, Turin, Italy
POLYMERIC STRUCTURES WITH BIO-LIKABLE CHARACTERISTICS BY VAT POLYMERIZATION 3D PRINTING
Discussion session A2
Wednesday, June 16 14:30 CEST
Abstract
OP-6
Valentin Launay
Université de Haute-Alsace, Mulhouse, France
BENEFITS OF HEATER ACTIVATION IN NIR RANGE FOR POLYMER PROCESSING
Discussion session A2
Wednesday, June 16 14:30 CEST
Abstract
OP-65
Joshua Lawlor
Photocentric Ltd, Peterborough, UK
VISIBLE LIGHT 3D PRINTING: FROM MACRO TO NANO
Discussion session A4
Wednesday, June 16 15:30 CEST
Abstract
OP-7
David Limberg
University of Colorado Boulder, Boulder, USA
TRIPLET-TRIPLET ANNIHILATION POLYMERIZATION (TTAP) FOR HIGH RESOLUTION 3D PRINTING
Discussion session A3
Wednesday, June 16 15:00 CEST
Abstract
OP-8
Tracy Schloemer
Harvard University, Cambridge, USA
VOLUMETRIC 3D PRINTING ENABLED BY TRIPLET FUSION UPCONVERSION NANOCAPSULES
Discussion session A3
Wednesday, June 16 15:00 CEST
Abstract
OP-9
Raffael Wolff
TU Wien, Vienna, Austria
3D PRINTING OF UV-CURABLE PHENOLIC RESINS COMPOSITION BY HOT LITHOGRAPHY
Discussion session A3
Wednesday, June 16 15:00 CEST
Abstract
Advanced Materials and Applications
OP-14
Hussam Aldoori
Université de Lille, Lille, France
PHOTODEGRADATION OF BROMINATED FLAME RETARDANTS IN PLASTICS
Discussion session B1
Wednesday, June 16 14:00 CEST
Abstract
OP-15
Marek Bekir
University of Potsdam, Potsdam, Germany
PHOTO-INDUCED MOTION OF SPHERICAL BRUSHES
Discussion session B2
Wednesday, June 16 14:30 CEST
Abstract
OP-19
Alexander Hochwallner
TU Wien, Vienna, Austria
MOLECULAR DYNAMICS SIMULATION OF THE DYNAMIC MECHANICAL RESPONSE OF PHOTOPOLYMERIZED METHACRYLATE NETWORKS
Discussion session B3
Wednesday, June 16 15:00 CEST
Abstract
OP-20
Xiaoxuan Liu
Guangdong University of Technology, Guangdong, China
A SELF-HEALING, REPROCESSING AND TRANSPARENT PHOTO-CROSSLINKING PDMS ELASTOMER
Discussion session B1
Wednesday, June 16 14:00 CEST
Abstract
OP-21
Vijay Mannari
Eastern Michigan University, USA
PHOTO-INITIATED SOL-GEL PROCESS FOR ADVANCED FUNCTIONAL THIN-FILMS AND COATINGS
Discussion session B4
Wednesday, June 16 15:30 CEST
Abstract
OP-22
Uwe Müller
Kompetenzzentrum Holz GmbH, Linz, Austria
PRINTED ULTRATHIN PAPER SENSORS - THE FRUGAL WAY TO STUDY THE ONLINE CROSSLINKING OF RESINS AND GLUES
Discussion session B2
Wednesday, June 16 14:30 CEST
Abstract
OP-16
Maciej Pilch
Cracow University of Technology, Cracow, Poland
NEW SOLVENT QUENCHING PRESSURE SENSITIVE PAINTS (SQ-PSP) FOR MAPPING PRESSURE DISTRIBUTION ON SURFACES
Discussion session B2
Wednesday, June 16 14:30 CEST
Abstract
OP-18
Anne Sophie Schuller
University of Haute Alsace, Mulhouse, France
BIOSOURCED POLYESTER ACRYLATE COATING: SYNTHESIS AND CHARACTERIZATION
Discussion session B3
Wednesday, June 16 15:00 CEST
Abstract
OP-23
Jeroen Staal
Ecole Polytechnique Federale de Lausanne (EPFL), Lausanne, Switzerland
THE ROLE OF THERMAL MANAGEMENT IN THE RADICAL INDUCED CATIONIC FRONTAL POLYMERISATION OF COMPOSITES
Discussion session B3
Wednesday, June 16 15:00 CEST
Abstract
OP-24
Alessandra Vitale
Politecnico di Torino, Torino, Italy
RUBBER NANOFIBROUS MEMBRANES BY ELECTROSPINNING AND PHOTO-CROSSLINKING
Discussion session B4
Wednesday, June 16 15:30 CEST
Abstract
OP-12
Frank Wiesbrock
Polymer Competence Center Leoben GmbH PCCL, Leoben, Austria
UV-INDUCED THIOL-ENE CLICK-REACTIONS FOR THE COVALENT ATTACHMENT OF NANOPARTICLES TO POLYMER MATRICES
Discussion session B1
Wednesday, June 16 14:00 CEST
Abstract
Cationic Photopolymerization
OP-25
Philipp Marx
Polymer Competence Center Leoben GmbH PCCL, Leoben, Austria
CATIONIC COPOLYMERIZATION OF EPOXY RESINS AND SPIROORTHOESTERS UPON VOLUMETRIC EXPANSION
Discussion session C1
Wednesday, June 16 14:00 CEST
Abstract
OP-26
Yulian Pang
Beijing Normal University, Beijing, China
HIGH-POWER NIR-LED INDUCED CATIONIC AND RADICAL/CATIONIC HYBRID PHOTOPOLYMERIZATION
Discussion session C2
Wednesday, June 16 14:30 CEST
Abstract
OP-27
Helena Švajdlenková
Slovak Academy of Sciences, Bratislava, Slovak Republic
MICROSTRUCTURE OF EPOXIDES CURED VIA CATIONIC FRONTAL POLYMERIZATION
Discussion session C3
Wednesday, June 16 15:00 CEST
Abstract
OP-28
Roland Taschner
TU Wien, Vienna, Austria
RADICAL INDUCED CATIONIC FRONTAL POLYMERIZATION OF EPOXIDES USING BISMUTHONIUM-AND PYRYLIUM-SALTS
Discussion session C3
Wednesday, June 16 15:00 CEST
Abstract
OP-29
David Wottawa
TU Wien, Vienna, Austria
THERMAL INITIATORS FOR CATIONIC FRONTAL POLYMERIZATION
Discussion session C4
Wednesday, June 16 15:30 CEST
Abstract
Hydrogels, biobased and medical materials
OP-31
Barbara Dellago
TU Wien, Vienna, Austria
TOUGHNESS- AND DEGRADABILITY ENHANCERS FOR PHOTOPOLYMERS AS BONE REPLACEMENT MATERIALS
Discussion session D1
Wednesday, June 16 14:00 CEST
Abstract
OP-32
Sarah Keck
TU Wien, Vienna, Austria
LIGNIN-BASED PHOTOPOLYMERS FOR 3D PRINTING
Discussion session D1
Wednesday, June 16 14:00 CEST
Abstract
OP-33
Anne-Françoise Mingotaud
Université de Toulouse, Toulouse, France
HYDROGELS WITH PHOTO-SWITCHABLE STIFFNESS: A TOOL TO MIMIC EXTRA CELLULAR MATRIX
Discussion session D2
Wednesday, June 16 14:30 CEST
Abstract
OP-34
Camilla Noè
Politecnico di Torino, Turin, Italy
UV-CURABLE STARCH BASED MATERIALS
Discussion session D2
Wednesday, June 16 14:30 CEST
Abstract
OP-30
Adreann Peel
University of Iowa, Iowa City, USA
DEVELOPMENT OF DURABLE PHOTOGRAFTED ZWITTERIONIC HYDROGEL COATINGS FOR ANTIFOULING OF BIOMATERIALS
Discussion session D4
Wednesday, June 16 15:30 CEST
Abstract
OP-35
Tobias Robert
Fraunhofer Institute for Wood Research - Wilhelm-Klauditz-Institut WKI, Braunschweig, Germany
ITACONIC ACID AS RENEWABLE BUILDING BLOCK FOR UV-CURING POLYMER RESINS
Discussion session D2
Wednesday, June 16 14:30 CEST
Abstract
OP-36
Anna Schmidbauer
TU Wien, Vienna, Austria
PHOTOHYDROGELS PROMOTING NEOVASCULARIZATION FOR REGENERATIVE MEDICINE
Discussion session D3
Wednesday, June 16 15:00 CEST
Abstract
OP-37
Anjali Sharma
University of Potsdam, Potsdam, Germany
LIGHT-DRIVEN MOTION OF NON-POROUS SiO2 PARTICLES IN THE VICINITY OF MICROGELS
Discussion session D3
Wednesday, June 16 15:00 CEST
Abstract
OP-38
Lisa Sinawehl
TU Wien, Vienna, Austria
PHOTOPOLYMERIZABLE ADHESIVES FOR BONE FRACTURE FIXATION
Discussion session D4
Wednesday, June 16 15:30 CEST
Abstract
OP-55
Paul Strasser
Johannes Kepler University Linz, Linz, Austria
BIFUNCTIONAL AND HETEROBIFUNCTIONAL BODIPY MONOMERS AND THEIR USE AS GREEN-LIGHT PHOTOCLEAVABLE MACROMOLECULES
Discussion session D2
Wednesday, June 16 14:30 CEST
Abstract
OP-39
Jiawei Yang
University of Manchester, Manchester, UK
VISCOELASTIC CREEP BEHAVIOUR OF A THERMO-VISCOUS RESIN-COMPOSITE
Discussion session D4
Wednesday, June 16 15:30 CEST
Abstract
Photoinitiators
OP-40
Tugrul Cem Bicak
University of Strathclyde, Glasgow, UK
HIGHLY CROSSLINKED MICROSPHERES BY TYPE II PHOTOINITIATED PRECIPITATION POLYMERIZATION
Discussion session E1
Wednesday, June 16 14:00 CEST
Abstract
OP-41
Aurore Caron
Université de Haute-Alsace, Mulhouse, France
POLYMERIZATION INDUCED BY NIR IRRADIATION: PHOTOPOLYMERISATION VERSUS PHOTOTHERMAL POLYMERIZATION
Discussion session E1
Wednesday, June 16 14:00 CEST
Abstract
OP-42
Kerem Kaya
Istanbul Technical University, Istanbul, Turkey
HIGHLY CONJUGATED VISIBLE AND NEAR-INFRARED LIGHT PHOTOINITIATING SYSTEMS
Discussion session E2
Wednesday, June 16 14:30 CEST
Abstract
OP-43
Shaohui Liu
University of Haute Alsace, Mulhouse, France
NOVEL MUTILFUNCTIONAL BENZOPHENONE-BASED PHOTOINITIATORS FOR LED PHOTOPOLYMERIZATION AND 3D PRINTING
Discussion session E2
Wednesday, June 16 14:30 CEST
Abstract
OP-44
Johan Loccufier
Agfa N.V., Mortsel, Belgium
HYDROGEN BOND BALANCED FUNCTIONALIZED ACYL PHOSPHINE OXIDES
Discussion session E3
Wednesday, June 16 15:00 CEST
Abstract
OP-46
Junyi Zhou
University of Haute Alsace, Mulhouse, France
ORGANOZIRCONIUM MULTIFUNCTIONAL PHOTOINITIATORS FOR MITIGATING OXYGEN INHIBITION AND MIGRATION
Discussion session E4
Wednesday, June 16 15:30 CEST
Abstract
Radical Photopolymerization
OP-59
Huayang Fang
University of Iowa, Iowa City, USA
MECHANICAL PROPERTIES OF URETHANE ACRYLATE NETWORKS THROUGH RAFT MEDIATED PHOTOPOLYMERIZATION
Discussion session F4
Wednesday, June 16 15:30 CEST
Abstract
OP-50
Maurice Gilberg
Leibniz-Institut für Verbundwerkstoffe GmbH, Kaiserslautern, Germany
INVESTIGATION OF SHRINKAGE-OPTIMIZED RESIN VIA TMOR
Discussion session F1
Wednesday, June 16 14:00 CEST
Abstract
OP-60
Parnian Kianfar
Politecnico di Torino, Torino, Italy
FORM-STABLE AND SOLVENT-RESISTANT PEO-BASED ELECTROSPUN MATS BY PHOTO-INDUCED CROSSLINKING
Discussion session F4
Wednesday, June 16 15:30 CEST
Abstract
OP-51
Azra Kocaarslan
Istanbul Technical University, Istanbul, Turkey
THE NEAR-IR LIGHT INITIATED FREE RADICAL PHOTOPOLYMERIZATIONS USING 2D BLACK PHOSPHORUS
Discussion session F3
Wednesday, June 16 15:00 CEST
Abstract
OP-52
Kostas Parkatzidis
ETH Zürich, Zürich, Switzerland
EFFECT OF POLYMERIZATION COMPONENTS ON OXYGEN-TOLERANT PHOTO-ATRP
Discussion session F2
Wednesday, June 16 14:30 CEST
Abstract
OP-53
Manon Rolland
ETH Zürich, Zürich, Switzerland
TAILORING POLYMER DISPERSITY IN PHOTOINDUCED IRON-CATALYZED ATRP
Discussion session F2
Wednesday, June 16 14:30 CEST
Abstract
OP-48
Stephan V. Roth
Deutsches Elektronen-Synchrotron, Hamburg, Germany
TRACKING PHYSICAL TRANSFORMATIONS DURING PHOTO-INDUCED NETWORK FORMATION BY REAL TIME X-RAY SCATTERING
Discussion session F1
Wednesday, June 16 14:00 CEST
Abstract
OP-54
Larissa Alena Ruppitsch
TU Wien, Vienna, Austria
DIFUNCTIONAL CYCLOPOLYMERIZABLE MONOMERS FOR REDUCED SHRINKAGE OF PHOTOPOLYMERIZABLE NETWORKS
Discussion session F2
Wednesday, June 16 14:30 CEST
Abstract
OP-56
Veronika Strehmel
Niederrhein University of Applied Sciences, Krefeld, Germany
PHOTOINITIATED RADICAL POLYMERIZATION OF IONIC MONOMERS RESULTING IN SOLUBLE AND CROSSLINKED POLYMERS
Discussion session F3
Wednesday, June 16 15:00 CEST
Abstract
OP-57
Richard Whitfield
ETH Zürich, Zürich, Switzerland
TAILORING POLYMER DISPERSITY BY (PET)-RAFT POLYMERIZATION: A VERSATILE APPROACH
Discussion session F4
Wednesday, June 16 15:30 CEST
Abstract
OP-58
Gamal Zain
Slovak Academy of Sciences, Bratislava, Slovak Republic
MULTIFUNCTIONAL COTTON FABRIC VIA SURFACE-INITIATED PHOTOATRP
Discussion session F4
Wednesday, June 16 15:30 CEST
Abstract
Thiol-Ene Polymerization
OP-13
Ricardo Acosta Ortiz
Applied Chemistry Research Center, Coahuila, Mexico
DEVELOPMENT OF PHOTOCURABLE GRAPHENE COMPOSITES DERIVED FROM EPOXY/THIOL-ENE PHOTOPOLYMERIZATIONS WITH SHAPE-MEMORY PROPERTIES
Discussion session G4
Wednesday, June 16 15:30 CEST
Abstract
OP-62
Walter Alabiso
Polymer Competence Center Leoben GmbH PCCL, Leoben, Austria
SHAPE MEMORY-ASSISTED SELF-HEALING (SMASH) OF THIOL-ENE NETWORKS
Discussion session G3
Wednesday, June 16 15:00 CEST
Abstract
OP-61
Cuong Minh Quoc Le
University of Haute Alsace, Mulhouse, France
EMULSION THIOL-ENE PHOTOPOLYMERIZATION: TOWARD GREENER METHODS FOR SYNTHESIS OF POLYSULFIDE LATEXES
Discussion session G1
Wednesday, June 16 14:00 CEST
Abstract
OP-63
Alexander Ricke
TU Wien, Vienna, Austria
PHOTOPOLYMERIZABLE AND DEGRADABLE BIOMATERIALS BASED ON ACETAL MOIETIES
Discussion session G2
Wednesday, June 16 14:30 CEST
Abstract
OP-17
Elisabeth Rossegger
Polymer Competence Center Leoben GmbH PCCL, Leoben, Austria
LOCAL CONTROL OF DYNAMIC EXCHANGE REACTIONS IN 3D PRINTED THIOL-ACRYLATE VITRIMERS
Discussion session G4
Wednesday, June 16 15:30 CEST
Abstract
OP-64
Narmin Suvarli
Karlsruhe Institute of Technology, Karlsruhe, Germany
AEROSOL THIOL-ENE PHOTOPOLYMERIZATION FOR THE SYNTHESIS OF NANOMATERIALS
Discussion session G3
Wednesday, June 16 15:00 CEST
Abstract
Talks from Industry
OP-66
Markus Lunzer
UpNano GmbH, Vienna, Austria
A NEW HORIZON IN HIGH-RESOLUTION TWO-PHOTON 3D-PRINTING
Discussion session I1
Wednesday, June 16 15:00 CEST
Abstract
OP-67
Andreas Moeck
RadLab AG, Killwangen, Switzerland
NEW URETHANE (METH)ACRYLATES WITH HIGH BIO-RENEWABLE CARBON CONTENT AND REMARKABLE MECHANICAL FEATURES
Discussion session I1
Wednesday, June 16 14:00 CEST
Abstract
OP-68
Lena Pitzer
Covestro Deutschland AG, Leverkusen, Germany
EXPANDING THE PROPERTY PROFILE OF BAYFOL HX® FILM TOWARDS NIR RECORDING
Discussion session I1
Wednesday, June 16 15:00 CEST
Abstract
OP-70
Richard Plenderleith
Sartomer Europe, Colombes Cedex, France
HIGH PERFORMANCE SOLUTIONS FOR THE RADIATION CURING TECHNOLOGY
Discussion session I1
Wednesday, June 16 14:00 CEST
Abstract
OP-69
Matthew Tucker
Tianjin Jiuri New Materials Co., Ltd., Tianjin City, China
CHALLENGES AND OPPORTUNITIES OF PHOTOINITIATOR DEVELOPMENT
Discussion session I1
Wednesday, June 16 14:30 CEST
Abstract
OP-71
Benjamin Willy
Evonik Operations GmbH, Marl, Germany
POLYESTER-BASED OLIGOMERS - NEW BUILDING BLOCKS FOR INDUSTRY-READY ADDITIVE MANUFACTURING
Discussion session I1
Wednesday, June 16 15:30 CEST
Abstract